|
We are Authorized Distributors for the following manufacturers:
|
| |
|
|
|
 |
 |
RooStick - Roomba to USB Bridge
The RooStick will allow any computer with a USB port to serially communicate with a Roomba. This allows any program that can issue serial commands to a COM port to control the Roomba. No level translation required! Drivers are available for Windows, Mac OS, and Linux. |
|
 |
|
|
 |
Roomba Communication Cable - miniDIN 8
This cable is perfect for connecting your RooStick or Roo232 to your Roomba SCI port. Wired straight through. Male miniDIN 8 connectors on each end are compatible with the 7-pin connector on the Roomba.
|
|
|
|
|
 |
Roo232 - Roomba to Serial RS232 Bridge
The Roo232 converts the Roomba 5V TTL signals to RS232 signals and will allow any computer with a serial port to communicate with a Roomba. This allows any program that can issue serial commands to a COM port to control the Roomba. No level translation required!
|
|
|
|
|
 |
Serial Cable DB9 M/F - 6 Foot
The basic connecting cable for any development board. Use these cables to hook any computer with a standard RS232 Serial port to any of our boards. Cable color and shape may vary slightly from image as our stock rotates.
|
|
|
|
|
 |
RooTooth - Bluetooth Wireless Roomba Connection
A cable-less solution developed for controlling your Roomba. The RooTooth v1.5 communicates with any Bluetooth enabled device using the Serial Port Profile (SPP). You can now tell the Roomba when to wake up, when to clean, and when to shut off. You can even remotely drive your Roomba from your computer or from the WiTilt!
|
|
|
|
|
 |
BAM Create Bluetooth Module
The Element Products BAM (short for Bluetooth Adapter Module) enables wireless control of the iRobot Create robot from a Windows, Mac or Linux PC. The BAM connects to the Create's expansion port - without any extra wires or cables. The BAM provides a virtual serial port connection between the PC and the Create. The computer can communicate with the Create in the same way it would if the Create were attached with a serial cable.
|
|
|
|
|
 |
Bluetooth Dongle
This USB dongle provides a PC side Bluetooth interface for our BAM Bluetooth adapter. After extensive product testing, we selected the dongle for its superior range of operation. The dongle's external antenna allows it to attain the maximum Class 1 Bluetooth range while still remaining FCC compliant. The dongle also includes a license for the easy to use BlueSoleil Windows host software providing a complete Bluetooth solution for your PC or Mac.
|
|
|
|
|
 |
Mind Control Package
The Mind Control lets the user take command of the iRobot Roomba Vacuuming Robot or the iRobot Create. This small and powerful device lets the user write custom programs for the robot in the C language while fitting in the space of the robot's expansion port. It turns the Roomba or Create into a powerful robotics development platform. With the Mind Control one can monitor all of the robot's sensors, control its motors, play songs, and flash its LEDs, all in real time.
|
|
|
|
|
 |
eProto module for iRobot Create
The eProto provides an easy and quick method for the user to interface custom electronics to the iRobot Create Command Module. The eProto plugs into any of the Command Module's four ePorts. Each of the DB-9 ePort pins are routed to individual solder pads on the board for easy connection. Multiple power and ground pads are provided. A grid of holes on standard 0.1" (2.54mm) centers provide a small area for building custom circuits.
|
|
|
|
|
 |
eDisplay Module for iRobot Create
The eDisplay is a simple and easy-to-use display for the iRobot Create Command Module. The eDisplay extends the Command Module's capabilities by enabling users to print text and numbers on its screen. The eDisplay provides a capable display for developing and debugging the user's applications at an attractive price. The included C function libraries make development a snap.
|
|
|
|
|
